Samsung HL-P5063W 50" Rear Projection HDTV "service mode" Questions

...reset lamp be carefull its done in the service mode with tv on press mute 1-8-2   under one of the service menus press enter on lamp clear then power off to get out of service ...

...the service mode; under option menu DDP1010 (DDP1011, where applicable) adjust the V-Flip option back to normal. If the problem continues replace the DMD Board Not sure how to get to service

...service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. ...

service mode to do this. Hit mute on remote then 182 then power button. Unit will come on in service mode, look through each option by pressing enter until you see lamp timer and press enter to reset.

service adjustments helps. heard there is a bulletin and/or modification because of updated cw. any info? there may be a jumper to remove on the DMD board, some of these models require it, it could be

...Service Mode (In Standby mode, press "Mute", "1", "8", "2" and "Power" to turn the screen on and enter service mode) 2. Check if there is an error in the DMD board DDP1011 → TEST PATTERN ...

...mode won't clock through to 100%on a Samsung SP-48T5HP? It needs to most likely be re-initilized in a technician service menu. If the convergence looks fine otherwise this is most likely the

is wrong. how do I reset on screen colors to original factory settings? You may have to do a reset in service mode....sorry - don't have the guide but it should be in the usermanual for this model

...I replace that myself? You can replace it your self but it's the re-alignment in the service mode software you will have a major problem with. Not an area to be into if you've never done one

...service mode and re-align the registers, if you've never done this you must call a qualified svc center. Most color wheel replacements require re-alignment. The DLP must match the speed of the color ...