Samsung HL-P5063W 50" Rear Projection HDTV "replug tv few times picture" Questions

...replug tv and sometimes have picture for a few min then tv turns off and on meanwhile all three led lights are flashing. lights do not flash all the time only while tv is turning off and on the lamp ...

...Lamp might be some how the causes again.Tries unplug,replug tv back like about an hour later.Try it again,should work now.If not,yes the projection lamp,might have been kill by the cold

replug. when I turned on the TV the picture came in upside down, not good. no one would give me the code to flip the screen as it is in a hidden menu, well after months of searching the web I found it

...replug to reset the set. Comes back on, didn't have the problem immediately but then it came back after a few minutes. By plugging/unplugging I was able to determine that it only does this on analog ...

...TV? If your set all of a sudden won't come on, e.g., the screen is blank, but the LED on the under the screen next to the on/off switch keeps flashing, then there may be an internal fault on the set ...

TV. The green light blinks on the power/display LED and the picture comes on for a few seconds and then the screen goes black . Then the red light blinks 4 times pauses and 4 times(this cyle repeats).

...tv unplug,replug it back tv like about an hour later,tv will temp.work for that day,until tv really cold and cool down problems,probally will come back.Tv have faulty DM power supply board like dying ...

...TV. Wait about 30 minutes and replug to AC mains and redo the cabling. Switch on the TV and see if it works..Even this fails then its on board capacitor burned in the tv .you need to replaced the ...

TV shut off by itself and it will not turn back on at all. I can repeat this process of unplugging, re-plugging to any outlet, turning it on, waiting a few seconds, it powers off and will not power on

...replug the tv back in and try again.....Did not work. Does anyone have /had the same problem and what was or what might be the problem and/or solution. Hope someone can help First if you have had the ...