Samsung HLP6163W 61" Rear Projection HDTV-Ready Television "dlp power itself" Questions

...dlp 5064 tv only seems to do it when the tv is on for a long period also when the power is on the standby/lamp is illuminated Try connecting the TV directly to a different wall outlet and check. If ...

DLP TV,DC2 Main power supply: BP44-01001A SMPS-DLP TV PN082DPS-VF(A),AC/DC,90V-132 A quick Google search for these part number (BP96-01726B & BP44-01001A) will reveal many sources, and pictures to

...DLP that intermittently shuts itself down,the sound stops, the picture disappears, the screen goes dark but not completely off. A few moments later the picture returns, but no sound. None of the ...

...DLP Rear Projection TV keeps turning itself off. The TV keeps turning itself off, it occurs every five to ten minutes, sometimes more often. I have found that pointing a fan at the back of the tv ...

...itself of can immedately turn back on it is a 50 inch SamSung one year old can any one help with this problem do a voltage check the transformer & the bridge rectifier and the whole off the power ...

...DLP chip to address white spots on the screen and found that insufficient voltage from the power supply cause the issue in the first place, or that the light engine itself was a contributing factor. ...

...DLP board. Moreover experience is a must to do work with this TV. As far as lamp il ON, there is no fault to its power supply board. The fault lied in the main board itself. If you are aware in ...

...power supply. Make sure your Samsung DLP is securely plugged into a working outlet. Plug the TV into a different outlet to see if the problem still exists. Make sure that a fuse hasn't blown in your ...

...power ballast and have bypassed temp sensor and lamp door switch, ruling those out as problems. Because the lamp lights up normally for 15-20 seconds, I didn't think the lamp was the problem. Is it ...

...itself off periodically. Sometimes it goes for hours and other times it happens several times in a 5 minute period. I suspect a bad connection/dry joint in the power supply. Look for regulator I/c's ...