...so clean these with Qtips/alcohol. and make sure its seated correctly.If it dont then try to locate main radio fuse and remove fuse to reset radio.some radios have a reset on the front
Question about Blaupunkt Car Audio & Video
...radio/sat nav fx not working how do I reset, the unit does not power up Check the fuses! If the fuse box fuses are ok check the one on the back of the radio...needs to be removed! Hope this
...reset the unit. The first time that you power the unit up, the volume will be at level 12. If this does not work, there is a fuse that is on the power cable of the unit. To get to this, you will need ...
fuse box that runs to the radio for about 5 minutes and this might reset the unit to factory settings and fix the problem. Realize that your radio station presets and audio adjustments will have to be
Question about Pioneer Car Audio & Video
...reset button or inline fuse? The "main" fuse (in the fusebox) is OK. Take the unit out of the dash. In the back of the unit, disconnect/remove the wiring connector. Underneath a little "flap" on the ...
Question about Car Audio & Video
...fuse under bonnet and side panels seem ok Contact Lexus for the reset on the unit. Removing power on many of newer units sets off an anti theft circuit that renders the unit inoperable unless you ...
Question about Sony Car Audio & Video
fuse" you mean the one on the back of the radio unit itself. Make sure all the wires are connected properly (especially the power and ground wires) Good Luck! on the front of the unit there is a reset
Question about Kenwood Car Audio & Video
...fuse in truck, tried to reset, I could hear sound trying to reset, but could get it to work model KDC 355U check the fuse in the back of the radio remove from dash and check all connections are
...the USB interface. Hitting the "source" key doesn't even select USB. You might have to reset the logic by disconnecting the power to the unit. Remove the fuse temporarily, or both fuses if it has
Question about Pioneer Car Audio & Video
...reset that deck is this. Get the removal tools, slide them in to release the deck. Once its out look in the back corner of the deck for a fuse. R -R the fuse you should hear it cycle, thats
68 questions posted
Usually answered in minutes!
240 Questions
257 Questions
245 Questions
227 Questions
184 Questions