SimpleTech FS-U25/500E 500 GB USB 2.0 Hard Drive "computer saying connect failed" Questions

what do I need when is says low power Try a USB port on the back of the computer. If you still get the same Msg. try other computers. Check the connection on the drive for dirt and lint. Clean if ...

...Too Bad. do this take apart the hard drive enclosure. and try to connect the hard drive direct to the computer, if you can't do this, try with another adapter, if this fails your HD is Die. ...

says USB port problem...on 3 different computers Without a bit more info, I can't say for sure. I have the same drive, it's been around for a while now and if yours has had a lot of use then I would ...

...connect my wd to the computer. it would not show up in my computer but was there in devices and printers and disk management. it also says not initialized and unallocated in disk management..... ...

...saying Netdisk is disconnected. We are wondering if it is possible to use a USB cable to connect Netdisk to the router. Or, do we possibly have to reinstall software? Any ideas? Perhaps buy one on ...

...the Back of your computer. 3. Finally I want you to connect the Mini USB connection to the One Touch Drive. I have seen this work in many instances. If this works email me at, ...

computer doesn't boot 'no boot device available" it cant find the hardrive it says sata 0-none sata 1-none sata 3-none sata 4-none One bad lead can cause a computer to continue on a cycle or to ...

...connect to the different PC all of sudden its wont works, computer reconganize the drive but not able to access any files. its say I/O problem. is than any thing that I recover my date from this HD. ...

...failed, however it can also be a damaged driver or registry entry on the computer it's connected to. Try connecting it to another PC, let me know wether or not it works. If it does we need to address ...

...computer and it is advised to connect it to the back of the computer and run a clean scan on the portable. Right click on the portable hard drive and explore it. May be you should run the below ...