...exposure select clear exposure the screen should go blank enter 46 print 19 print change from 2 to 1 this will turn off toner save mode. Change the toner cartidge. it has developer and toner ...
Question about Sharp Office Equipment & Supplies
...exposure level can be adjusted to suit your copying needs. 1 Press the AUTO/MANUAL/PHOTO ( / / ) key to select the PHOTO ( ) mode. 2 Press and hold the AUTO/MANUAL/PHOTO ( / / ) key for approximately ...
Question about Toshiba Office Equipment & Supplies
...or photo modes) then again C button, then again exposure mode change button then 1 and 4 then start button ( this is what you press to take a copy) Try this and put it right. Best Regards, ...
Question about Office Equipment & Supplies
...1. insufficient exposure lamp luminosity 2. defective engine pcb 3 incorrect shading position 4. defective CCD unit check exposure lamp harness connections; adjust position of contact glass shading ...
...replace scanner board or engine board 1. defective exposure lamp or inverter board 2. incorrect shading position 3. poor contact on connector terminals 4. defective scanner board or engine ...
...Exposure Key (far left key) once you do this correctly the screen should go blank. Type in the following 14 (using the copy quantity keys) Press your copy key 1 (using the copy quantity keys) Press ...
Question about Sharp Office Equipment & Supplies
...1) The original image might be too light or dark, adjust the exposure manually to compensate. 2) The copier might be in automatic exposure mode, adjust the automatic exposure manually. 3) The copier ...
Question about Sharp Office Equipment & Supplies
...1) Clear key ON - Exposure mode select key ON - Clear key ON - Exposure mode select key ON (The machine is ready for entry of the main code of simulation.) 2) Main code input by 10-key ? Start key ON ...
Question about Xerox Office Equipment & Supplies
...1. Defective scanner PWB. 2.Defective exposure lamp or inverter PWB. 3.Incorrect shading position poor . 4.poor contact of the connector terminals Solutions:- 1. Replace the scanner PWB and check for ...
...1) - 0 - (on displey 2-0) - a start - (the codes of the users delete) - ID possible to copy. NP7161 - a regulation AE Adjustment AE: -User mode 12 - an the man picture, 12. then - a button "+/- ...
23 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions