turns red and power light is now blinking orange for about 30 seconds and fan shuts off. Status light continues to blink in increments of 6 blinks over and over again power light remains steady orange
Question about ViewSonic Office Equipment & Supplies
...turns purple and the lamp and temp l I talked with a tech from Viewsonic and he said to unplug the projector, press the power button for 30 seconds, and then plug it back up. I did that and I still ...
Question about Sanyo Office Equipment & Supplies
SANYO PLC-SU31 when turn it on make the count from 30 to 0 seconds on the screen, and then turn it off. Is this a problem whit lamp? Hi, Please visit below link. Projector
Question about ViewSonic Office Equipment & Supplies
30 seconds of use? after a power surge, I changed the lamp because I thought that was the problem, but even with a new bulb I can still get about 30 seconds before it just shuts itself completely off.
Question about Sanyo Office Equipment & Supplies
...the green power light will stay lit for about 30 seconds and then will start flashing red. The projector will not turn on. that usually means that the lamp it`s worn out, you may need to replace
...turns off after 20-30 seconds. I replaced the lamp but it still occurs Check to see if the fan is working, It maybe getting too hot. Myronhalo have you tryed connecting your 2200MP in a socket that ...
Question about ViewSonic Office Equipment & Supplies
...30-60 seconds Projector has 1800 hours on bulb. Unit will turn on for about 60 seconds and then shut down. Lamp light turns red and indicates an overheating issue. How can this be overheating only ...
Question about Eiki Office Equipment & Supplies
...30 seconds check the following : 1.does the lamp glow 2.do u get the connected image 3.if yes does the screen show temperature or overheat 4.if yes then one of the cooling fans do not work properly & ...
Question about ASK Proxima Office Equipment & Supplies
30 seconds. No indication of overheating or lamp problem. The projector will turn on, project the startup image, and then project an image from whatever source I have connected. After about 30 seconds
Question about InFocus Corp. Office Equipment & Supplies
turns on for about 30 seconds and then turns off You should check first the fw version. Tha last fw version is v 2.78.30. if the fw is updated it, check the power supply part number, must be ...
15 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions
