Question about Hotpoint Washing Machines
...area where the dispenser water and detergent enter the machine. you can run your hand around the rubber boot and you might be able to remove the article, it will be in the upper left part of the ...
...water and the pump makes noises from it hitting the sides. Water pump hitting the side ?? Could be a sock or somthing caught in the pump or pump intake area.. Hope this helps !! rate me good
...water REMOVED OBSTRUCTION FROM CAP AREA,,, AND STILL WONT DRAIN This video will show you how to clean the pump and how to find the fault on a washing machine that won't drain or empty the water ...
...area; disconnect this from the top carefully and blow into it, it should be free; if it is clogged you will hav a water level problem. Unblock and refit carefully. Would be good if you mention which ...
area for repairing. You could have a clog in the housing underneath the dispenser where the water flows through a hose into the tub. Pull the dispenser drawer completely out. There is a tab that needs
...water is about $45,and if you hire it done you need to find out the labor rates in your area,it can take from 2-7 hours to complete depending on how hard the old water soaked and rusted bearings come ...
...to it. Refer to the Water Temperature Sensor section. Now I have tried to help you. Pleas help me and rate/vote this response. Thanks and good luck. If you are in the Denver Co area, I can help you ...
...area has very hard water. Any assistance is much appreciated. Thanks CLR can be great if it is hard water blockage. If it is food blockage or a lot of hardwater you will have to dissassemble part of ...
...water pression from the main. What can i do or what can the problem be? Thank you Roberto Verde 0131 2298362 Plug off the wall. Open up behind, you will find a thin tube, maybe tranparent or black ...
...water from front.....appears to be coming down thru the motor area....hoses all seem fine with no leaking Sorry to read about your problem, I hope this helps you out. your water pump or tub bearing ...
6 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions