Toshiba 42HP95 Television "tv base removal" Questions

tv above base 3)pick up tv and base will come off once you remove it you realize how easy it is I struggled with this at first but realized it was simple in the end!! 1 - Locate and remove 4 screws at

...base off of my tv so I can mount it on the wall? I can't find a "release" at the base to separate it from the tv You don't have to mess around with the screws on the bottom of the base. There are 4 ...

...with the tv mount to find these 2 screws) once you do that, the base comes out. ( you need to remove 3 screws on each side of the base. Good luck!!! My TV looks awesome on the wall. Remove 6

base of the tv. I'm left with a piece on the bottom that I can't figure out how to get off. I removed two screws but it's still solid. Any ideas how to get it off? Are you wanting to sell the base? My

...at the back of TV, where base is joining. You might need a screw driver with magnetic head to remove screws. After removing screws, slide the base clamp out from the back of TV, and you are

...base from tv how do i remove the base on my 32 lcd westinghouse tv so i can mount it to the wall on a bracket? I researched this problem on the net and found the solution. Someone on one of the posts ...

...need 2 people because the tv is awkward. But you should be able to lift it straight up from it's base, unless you have a different type of base. I have the same model tv that I purchased from ...

...base to the TV? The operating manuals online do no show the same config as I have No. Stand or base on any model of TV should be removeable without taking the back panel. How to Remove Pedestal Stand ...

...base? I have an Olevia 42" TV. I was able to remove the base by removing 16 screws on the back side. They were arranged vertically in 4 sets of 4. The screws go through the back panel, through the ...

...base on a tv How do I remove the base on my 42 inch digital lifestyle tv so I can mount it on the wall. I have tried to remove all the screws that are surrounding the plate to hole the base but it is ...