Honeywell Electronic Programmable Heat/Cool Thermostat - CT3300A100 Heater "temp match" Questions

...heater Heater thermostat temp. does not match wall thermostat temp. The heater has to calabrated, this is done with a special remote control, that the people have you bought it from. It is a simple ...

...new heater. Have you read the operating manual that came with it? In AUTO, it decides if the room temp. matches your setting you desired. Other than that,I'd say it needs to be returned for refund. ...

...temp is set at). You can only turn it off by turning the system switch to off. I rechecked all the wire colors to the original connections and they match. (4 wires...R, W, G, Y) I checked the model ...

...temp time less=less time it works hard to match what you desire. but if not only source of heat no. time to heat room would be almost the same thus you would save what you used during the day due to ...

...temp. 410A about 350 to 425 psi. Keep in touch Johnstone supply handles Coleman evcon go to ther website or call there toll free number in your area and give them the model number and they can match ...

i think my motorised valve is not working. I replaced the thermostat, have it down to 55 and there is still 70 plus temps in heat. system is 3 zones. i bought the replacement honeywell unit today. the

...match another thermometer inside home am having to set heat at 74 degrees to stay warm. I have bought another thermometer to place in the same room and it reads about 4 to 5 degrees lower than the th ...

...and heating outlet and simply match yours to any available unit in the temp range yours is set to or 130 degree limit, and also has the same wire count, should be around 15 bucks or so good ...

match up the length. You may have to purchase a longer one but you can coil up any extra. Reverse the removal procedure to install and make sure you seal up the burner box with high temp silicon prior

...is operating correctly. You can use another thermometer and leave in room and see if it matches the temp on theremostat. Forced air is a little cooler. Make sure all your vents are open. watch ...