Toshiba 50H13 50" Rear Projection Television "tv respond remote sometimes" Questions

...TV does not respond to remote - sometimes power off then on from remote corrects this Sometimes not even TV buttons work - have to switch off at plug to correct sounds like there's a fault somewhere ...

tv remote? if you are asking about the ? innovage? large tv remote? you do not need a code booklet. maunally turn your tv on point the remote at the tv push ? code search? a red button will blink push

tv has an intermitant fault & will sometimes not respond to the remote control, I have tried new batteries, and checked the remote control by tuning an infra red light switch to the remote control

...tv blinking. It only responds to remote sometimes I have the blinking too. Mine is a 5 year old Mitsubishi WS-A65. The picture blinks to black but the sound is always OK. It can go several minutes ...

...TV channels - connected to DIRECTV have several channels that have black boxes that fill nearly the entire screen - at times, but rarely, letters/words appear. Turn off closed-captioning. You'll find ...

...respond so again I have to turn power off to the TV. Warning to everyone DONT BUY SONIQ this is my 3rd replacement soniq and all have had issues. If you really really really want a Soniq get extended ...

...TV in the Cable S-Vid mode, it will sometimes switch over to the Antena A position and a different channel, in the middle of our program. Please advise if this is a known problem. Also, is it ...

tv tech-Vision MERCI Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked

...tv? it is a small circuit board that plugs into a socket on the small signal board, it contains a lot of tiny parts. In these sets any unusual problem like: No or intermittent sound, remote does not ...

...remote commands (the menu will show and navigate, but the tv never actually does what you tell it to) - Will not switch inputs (it will show that it is changing from 1 to 2 to 3, but the picture ...