Toshiba TP61H60 61" Rear Projection Television "blue line center touch" Questions

...blue and red will line up, but the green is off center on the tv. It's like in a wave. The picture has a green wave across the bottom of the screen, creating ghost-like pictures. There is also a fine ...

...Blue cross hairs in line with the red and green. This is only on the left hand side of the screen locations 1,4 & 7. All others locations, center, top and bottom will algin perfectly. The blue cross ...

...center) projector has a green led lit on it, but both the blue (right) and red (left)projector boards do not. What should i do???? If the lines you see are retrace lines, It means that the 200VDC are ...

...blue lines are all straight. The red lines in the middle is straight but the other red lines curve. The top red line curves like a smile and the bottom red line is like a mouth frown. Then I get a ...

blue and red semi-circular areas at the bottom of the picture. I've posted this solution several times but here goes. Try setting up the convergence through the menu by accessing the convergence setup

...Blue (2) Use 4, 6, 2, and 5 to move the cursor position (dotted lines). (3) Use thumb stick to move the convergence point. (4) Three adjustment modes are available: 1. (3x3) Press ?STATUS? 5 times ...

BLUE,YELLOW), are all over the place and can not be allinged. This came to be the other day just from shutting off the unit and turning it back on... The colors kind of have a "wave" across the screen

...blue emmision of the crt is dying off and going into saturation when driven hard. To fix, replace with a new picture tube/crt. In some cases you can get a little more life out of that tube (with a ...

...center. Directly behind the plate you will see a square black plastic block with six black plastic shafts. There are two rows of three---you have to look closely as one row are marked FOCUS(do not ...

...blue (in your case) down. With the grill out of the way you will find an inspection plate behind it dead center---remove that. BEHIND THE INSPECTION PLATE LOCATE THE SQUARE BLACK PLASTIC BLOCK WITH ...