Toshiba TP55H60 55" Rear Projection Television "tv bent board" Questions

...TV Model# RT-49NA11T Green color gun shows bent arc on top & bottom.Red & blue guns are ok.How to adjust the green gun to remove the bent arc. This is causing picture shows mix color bars on ...

...bent pins 0211 ref schematic is this reconnection point. philips tv 20pt6341/37 I inspected the tv thoroughly there seem to be no other damage. hi i hope i can help you ? you said there is two bent ...

bent. When looking inside the tv the green and red are being projected bent at the top and bottom. Please help. Thanks Beth You need to replace the convergence IC stk392 -110...2 resistors and a fuse.

...TV - Picture bent and seeing multiple colors When I turned on my TV last night, Sony KP-46WT520, the picture was bent inwards on the top and the bottom, and a little bit on the sides. Also, I was ...

...bent on our 48 in tv. When we cover the light in the back the tv looks good. Any suggestions? Check for a burnt resistor on the convergence circuit board. This is usually what happens when the green ...

...bent; Found Convergence on the TV Setup Menu; Autoconvergence did not work; Unable to move the crosses in any direction when I tried to do it manually.Please help :) I love my TVJeanette Replace the ...

...bent or curved and theres red and green colors on pictures This tv have a problems known as a Convergence Problems,it dead.The tv convergence board,must have it the 2 STK convergence ICS and some or ...

...bent pin. Let me know....tks The lamp must be reset when replaced. Check the owner's manual on how to reset. I had a similar problem and I was instructed to reset my lamp with a few TV remote control ...

convergence problem My convergence went out on my 53" Hitachi. I replaced my convergence boards my self. I used a soldering gun to get the old ones out then used it again to put the new ones in. I had

...bent do not play with this tv replace the stk ic chips and the resistors around the stk chips ,cant miss em about 2 inches big with heat sinks on them. The tv convergence function can't fix R,G,B ...