have that choice lay the TV down on it's face. With both make sure you have plenty of moving blankets.The side would be my last resort because of stability. DO NOT LAY ON BACK!!!! Good Move, big IRISH
Question about RCA Televison & Video
...lay a rear screen 52inch projection tv down for travel will it ruin anything Absolutely. The biggest danger is the mirror breaking which is in the big bulge at the back of the set. If the set got ...
...lay a hitachi projection tv down to transport it rear projection tvs can laydown ON ITS BACK. if its in an open bed truck and plan on standing up. DO NOT FACE SCREEN TWORDS HOOD!!!!!! the screen will ...
...tv worked perfect until I moved and it was layed down on its face, on a soft bed, during the move. I have lost the red tint. Magic focus will not bring it back. How can I repair. sounds like the ...
...tv that has a pushed in front screen. How do I remove the front screen housing and return the screen to the original condition? 1) Remove lower,front speaker grill 2) Remove screws along bottom edge ...
...tv style except tubes are a whole lot smaller. The yellow line you see is most likely caused by a foreign substance hanging from the mirror or laying on the face of one of the picture tubes. If your ...
...screws and pulling it out of the TV. Lay the CRT down with its filler plug facing up in a location far away from the TV's circuit boards.sincerely. God bless youernesto cuaddramanagua, ...
...lay the TV face down on a soft surface (do not slide it around) you probably can see what screws need to be removed to remove the TV base. Keep the screws with the stand for later use if desired ...
Question about GE Televison & Video
...tv I transport them all the time and the best way to do it is to put something down soft in the bed of a truck then lay it down screen first on its face. If you stand it up in the bed of a truck the ...
...LAY THE TV FACE DOWN ON A BLANKET,,REMOVE PROBABLY 4 SCREWS ON EACH CORNER OF THE PICTURE TUBE,,AFTER THAT ,YOU AND A FRIEND CAN LIFT THE TUBE OUT ....TUBES ARE MEANT TO "IMPLODE" NOT ...
16 questions posted
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
243 Questions