Singer 7462 Sewing Machine "problems button holes" Questions

...button holes I was able to make button holes easily on scrap material, but when I went to make it on the coat with iron on interfacing, I had problem with the button hole going off track or stopping ...

buttonhole problem My HZL-E80 Juki sewing machine was working fine until I tried to do a buttonhole now all it does is beeb and will not sew a buttonhole. Sews fine with everything else. Manuel says ...

button holes Hi! I have a Singer model # 1120 sewing machine which I purchased brand new in 2004. My problem is when ever I do a button hole, I find the stitches are very tight or it doens'tlook like ...

...button holes it will go up but not come back on a Memory 4000 I start the button hole and it stitches up one side but stays at the top and keeps on stitching. it could be a problem with the button ...

...with it now is that it will never sew the button holes consistantly. I will set it where the button hole needs to be, and it will then proceed to place it where it wants to. Any help on this

...button holes! This machine continues to frustrate me. My old SingerI had for 20 plus years was easy to run. I worked for two hours and kept getting terrible button holes.. the back side has loose ...

The machine is beeping and does not start. It Singer 7463 sewing machine.The machine is beeping and does not start. It runs when I use the bobbin filler. I cleaned the bobbin area, and it still beeps.

...problems getting my button hole maker (Janome10000) to work. Even though it may make two or three button holes it at some point will instruct me to put the BH lever down...when it is already down. ...

...button hole attachment when I purchased the machine so disappointing. I was told by someone that their Viking had a similar problem and Viking send her an update to download on her Viking machine ...

Buttonhole is too long The button is in the foot tight and the lever is all the way down but the button hole is about a 1/4 inch too long. Try putting in a smaller button, and see if it recognizes it,