the screwdriver, tighten the screws on the lamp cartridge. Replace the plastic cover and screws. Snap the speaker grill back into place by pushing it into place on each side with the palm of your hand
...tighten the screws on the lamp cartridge. 9. Replace the plastic cover and screws. 10. Snap the speaker grill back into place by pushing it into place on each side with the palm of your
Question about Philips Televison & Video
...speaker grille (IT SNAPS OFF & ON) & there is a lamp cover with 3 screws holding it in place, near the left speaker. That lamp part#: 915P020010 $49.00 TO ...
...burned in the part,its in front of the tv behind the speaker grill,snap off the grill and there is a panel,remove the panel and between the left tube and middle tube is the part it has red wires on ...
speaker grill-should just pull off (snap fitted). Then remove the front control panel (4screws). Next remove 4 screws from bottom of front of screen- the screen should ten just pull off -also snap fit
...plastic screen by removing the bottom fabric grill (snaps off by pulling outward like a removable speaker grill). Remove several wood screws along bottom edge of screen. Lift up the whole plastic ...
...the screws on the lamp cartridge. 9.Replace the plastic cover and screws. 10.Snap the speaker grill back into place by pushing It into place on each side with the palm of your hand. ...
...Snap the speaker grill back in to place by pushing it in to place on each side with the palm of your hand. The part number for your lamp is 915P020010 You can also download your users manual by ...
...speaker grill and the front access panel. Pioneer TVs will either have pop-on/off connectors where all you need do is grab and pull, or it may have a few philips screws securing the grill. The screws ...
277 questions posted
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
264 Questions