Question about Toshiba Televison & Video
...to a module on the light engine - does this have any signals to shut down the ballast? I found R3 on the original board to be open, along with reading an open on CR1, D5 and D6. All the other ...
...ballast is...it can usually be fixed by replacing a resistor on the board itself...it is labeled R3 and is a 1000 ohm resistor When turned on, the TV red light apprears, then about 10 sec. later a ...
...of monet into this TV and am getting fed up. It's not a 1k Resistor but a 10k...it's the resistor R3 on the Circuit Board Part Number RPB-4434ZA (P/N: 23122468). If you don' replace the resistor
charge if you return your bad board to them- If you want to fix the ballast board- replace resistor R3 with 1000 ohm -1/4 watt (radio shack)( usually burns open- and diodes D2 &D3- (usually shorts
...for $174 less $47 core charge for your old board- or- to fix the ballast board- replace R3 with a 1000 ohm 1/4 watt resistor from radio shack & diodes D2 & D3 part # FMV-g2gs ...
...in mine yesturday,by replacing a single resistor on the ballast board (the resistor is labled R3 on the ballast), Google "Toshiba ballast replacement" and there is a nice write up with pictures ...
24 questions posted
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
243 Questions