Toshiba TheaterWide 52HM84 52" Rear Projection HDTV-Ready Television "tv blinking yellow power" Questions

TV won't power on. The yellow light blinks regularly - this is NOT listed in the manual (yellow blink + blue solid means lamp out; nothing listed for yellow blinkalone). The TV is two years old, and I

...behind the cover above the HDMI inputs. Plug in the tv and watch the yellow blinking stop and a solid blue will light when done. Unplug the tv, remove the card,plug in the tv and all will be

Blinking Yellow light on a HD 65" DLP Toshiba TV i switched the tv to power-save mode last night, tonight i turned on the TV and the yellow light blinks in cycles of three ... it has been an hour and ...

...yellow. I hold the power button for 10 seconds and the yellow status stops flashes and turns green for a second. I hear a click from the back of the set and then the status light blinks yellow again. ...

...at the base of the lamp compartment cover ensure it presses the switch lever in order to ser the tv to standby mode the yellow blinking will stop and u will see a stable red ready for switching ...

...TV will not turn on at all. No Green power button no lights at all, checked incoming power its good. The lamp status button had turned from green to yellow about 4 months ago but no blinking so I did ...

tv is turned on the power light will blink yellow like normal but will not power up, then red light next to yellow light blinks and everything powers down. is this a lamp? You really should give make

...tv model no 57HM167? unit tries to power up but no picture comes on. lights blink yellow and then blue with blue remaining on and yellow lights blinking. have tried to replace lamp twice with no luck ...

...blinking no power ? Mitsubishi TV troubleshooting Here's something that might also be useful. After you turn on the set, and get the regular red blinky lights, hold down the Device and Menu ...

tv will not power on. no red or yellow status light. Status light green, blinks rapidly, then blinks 1 time followed by 3 blinks. wait for the light to go out then press power. Then if it doesnt power