2014 Porsche Cayenne "remove back seat cushions" Questions

remove the cushion. The seat back does not fold any flatter even if the bottom cushion is removed. To return the seat to normal use, push down on the seat back, and pull up on handle on the side. This

back of the top part of the seat. If you want to remove the seat entirely you'll need to purchase triple square sockets. I think it's a T20. I beleive it's the same size as for the bolts to remove the

back in there). Remove the bolts (each side) securing the seat side bolsters (they are easy to see once the bottom cushion is removed), then remove the side bolters (gently release the clips that hold

...to Section 01-05 . Remove rear seat bolster mounting bolts. Remove bolster assembly. Remove four seat back to package tray retaining bolts. Remove seat back. To install, reverse Removal

...back removal Remove the seat cushion as described above. Remove the anchor nuts securing the rear seat retainer at the bottom of the seat back. Grasp the bottom of the seat back and swing upward to ...

Remove the 2 lower retaining screws attaching the seat back to the floor. Lift up and disengage the upper clips of the seatback from the top of the folding floor. Remove the seat assembly. To install:

...remove back seat in a 1995 Nissan Maxima Rear See Figures 3, 4, 5 and 6 Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward ...

...Remove the seat back by performing the following: Hinge the seat back forward and disengage the push-in fasteners holding the carpet backing to the trunk floor. Remove the bolts holding the outboard ...

remove the back seat to get to the fuel pump? On what? 3 possible ways the rear seat cushion is removed. On some the seat has clips that lift straight up. Or some have 2 small bolts at front bottom of

...remove rear seat from '68 camaro Most of those older cars had back seat that you push the seat cushion toward the back and a little under the back cushion. Once you have it pushed back lift up on the ...