Toshiba TheaterWide 62HM84 62" Rear Projection HDTV-Ready Television "ballast wont turn" Questions

...wont turn on. Looks like it might be the ballast. Can i replace on my own? How do I find one? U hear alot of clicking,when the power is turn?Yes,the ballast board is dead.Yes,tries ...

wont it usually takes me 10 to 20 min to get it to turn on. it tells me the bulb is bad but i just replaced it. please help CK the Lamp Fan if it stops running Lamp will shut off, and Ballast board is

...wont come on hear a click if i unplug and plug back in Hello! There is a chance that the ballast is becoming faulty. The ballast is the board that sends power to the lamp, without it, the lamp cannot ...

...for a while and now it just wont turn on the 34 error is a lamp abnormality, So if the lamp is new the Ballast or the Power Board could be the issue however the ballast would be more

...wont die due to bad ballast so replace lamp and see tv works or not. This tv has self diagnostic feature, turn On tv and let it shut down, now check standby light that would be blinking in specific ...

...wont turn on. it flashes green yellow red and then red How did you come to the conclusion it was the lamp? Do you hear sound? or did you If you have replaced Lamp then check Lamp Fan if it stops ...

wont come on and hte power led is blinking red 5 times when trying to turn on the tv the power led blinks green a couple times, both fans in the back turn on, then the fans shut off and the led blinks

...changed out lamp, tv still wont come on. Power supply? Make sure all fans are running,defective Fan can cause this,also Ballast board is what powers Lamp on. If ballast is bad Lamp will not

...wont turn on. the red light flash six times. What do you think is the problem. Lamp Fan is defective or its your Ballast Board part# 1-468-798 ,If Lamp Fan is OK it will be the Ballast. Look for one ...

Wont turn on yellow light blinks 3 times pause and repeats no other lights on If you can't get it on, you'll have to have a new Ballast assembly. Try unplugging it from the wall outlet. You may have ...