Whirlpool AMD012 12000BTU Split AC with tubing Kit 220-240 Volts "220 volt problems" Questions

Ad

A/C compressor has power to the contactor (220) but will not kick We set the thermostat to turn the A/C on but nothing happens at the compressor. I read power to the lower power wires and 220 is there

Ad

...220 is just putting two 110 volt circuits together. You should read only 110 volts from each leg to ground. But you should read 220 between both legs. Measuring between two legs that are supposed to ...

Ad

Question about Carrier Heating & Cooling

1 Answer

...have an electrical problem. It is either a lack of 220 volts getting to the outside half of the a/c or the 24 volt circuit not activating the contactor (big relay) that carries 220 to the

Question about Carrier Heating & Cooling

1 Answer

220 volt 50hz condenser fan motor, you will have to go through a refrigeration/air conditioning parts house and order this. 60hz you would have no problem finding one in stock. Carrier is a good unit,

Question about LG Heating & Cooling

2 Answers

...220 volts is on one switch, (that operates both 110 volt legs of power at the same time). - but sometimes each leg is on a separate breaker and if "one leg" trips you will still have power at the ...

Question about Goodman Heating & Cooling

1 Answer

...220 volt motor for fan and compressor. A replacement will generally cost about 50 to 75 dollars on Amazon.com. Look for the wires entering the unit, The pair of wires entering the unit will go into a ...

...able to check the voltage, did you check to see if you had 24volts at the contactor? Did you have 220 volts coming into the contactor? If no to the first question and yes to the 2nd question, take

Question about Ruud Heating & Cooling

1 Answer

...should run and the fan. Be very careful since that contactor has exposed parts and it has 220 volts running through it. That contactor coils is energized by low voltage current usually ...

Question about Frigidaire Heating & Cooling

1 Answer

...220 volt, but the plug you installed has a white wire which is normally on a 120 volt outlet. A 220 volt outlet would have 2 black wires and ground. If you do have 220 there, and the reset does no ...

Question about Ruud Heating & Cooling

2 Answers

...volt wires connect. When they close, 220 volts coming in will now go through to the other side of the contactor starting the high voltage motors. Follow me through this step by step so far and you ...

Not finding what you are looking for?
Whirlpool AMD012 12000BTU Split AC with tubing Kit 220-240 Volts Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Heating & Cooling Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66835 Answers

Are you a Whirlpool Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...