Toshiba CF35F40 35" TV "q301" Questions

...tv on and I get no picture. The power lite blinks slowly instead of staying in constantly swap out q301 Part# La7833s on board. Discharge crt first. youll need a cheap desolder vacum tool and 30

my tv have one line white horizontal The vertical output integrated circuit (Q301, mounted on a heatsink roughly in the middle of the main circuit board) isn't working. This is frequently because of ...

...bad parts shutting down this set. just fixed one with that problem it was the vertical output ic Q301 that was shorted. try wicking it out. it is a LA7833S. Postings say to be sure to use the ...

...again, without the screen coming on. just fixed one with that problem it was the vertical output ic Q301 that was shorted. try wicking it out. it is a LA7833S. Postings say to be sure to use the ...

On Toshiba TV model CF35F40 I have replaced vertical output Q301 (TA8427K), I got back the vertical raster but it is out of sync. I tried to find a control to put it in sync but I did not found any. ...

...a direct view TV. Could be vertical, a common problem with that unit is the vertical output IC Q301 and poor solder connections of the link off R305. This could be enough to put the unit in ...

...problem the repair tech may want to replace the Ic and this is ok too. Location of IC on board is Q301 Part number 23319832 and costs about 10-15 dollars plus labor. The other thing that most often ...

... Resolder as necessary. And....of course you may as well pull out the main board. The deflection IC Q301 will need resoldered as well (vertical IC). Check the capacitors near and next to Q301, they ...

...to a heat sink, (peice of metal standing up) It is not IC301 (it is a Ic) Location on board is Q301 for this model. SD TECH Toshiba B0378560 Q301 IC, TA8427K (VERTICAL

...but no success. Looking here, it appears SD Tech and tvrepair biz on similar Qs point to chip Q301. I've checked this and it is physically damaged. Is there an underlying reason for this to