Panasonic PT L720E Multimedia Projector "reset proj" Questions

...Press the "Proj/Setup" button and then the "> 9" button to access the Management Menu. Use the "v 0" and "Enter 8" buttons to select Lamp Reset. Press "Proj/Setup" twice to exit. Hope this

error message after replcing lamp data proj,. replacing lamp for data-projector pt-l 720e.I replaced the lamp but still the message "replace lamp " shows up You have to reset the lamp timer.

Problems connecting to dvd Proxima UltraLight LX1 Multimedia Proj Have tried to connect "S" video cable but projector says no data input reset the settings for factory default.

...Proj lamp Pt. No. ET-LA059X Looking to find an alternative to Panasonic original part which is way too expensive at $A1000+. MAybe someting can be modified ?? its described as a 160W UHM Projector ...

...an XD520U and am having the same problem, but not hearing any high pitch noise. The Lamp has been reset correctly, and checking the info screen verifies it, but still after a Just like this

reset of your Cinego in the in the Management Menu (credit to Cooljazz); and/or 3. it is just "slow" in sensing the presence of a VGA source as it cycles in its selection, internal DVD, VGA, Composite

...proj for an average of 4-6 hours every time, then expected lamp life goes to about 50%. THis is very rough and in a general sense so just take it as general guidelines. TIPS TO EXTEND PROJECTOR LAMP ...

...reset the timer and run the proj with the orginal lamp for a while. The lamp has been working fine but I am concerned that their is a technical reason why the bulb should be replaced, like maybe the ...