Toshiba 32A32 32" TV "tube picture shaking" Questions

picture tube base socket has damaged. Picture tube base socket is one diretly soldered to the base card, which in turn pluged onto the picture tube neck. Its focus control pin will usually get damaged

...Picture tube base socket is located at the picture tube bas card itself. It is directly soldered to the base card, throu which the connections are going into the picture tube via its pins. You just ...

...picture tube base socket. Picutre tube base socket can be located at the picture tube card connected at the neck of the picture tube. It is the socket that connects the picture tube pins to the ...

...picture tube with the plastic end of a phillips screwdriver. this will shake the old sediments in the crt. the tv will probably shut off if you do it right. tap harder and harder many times. fixed. ...

...picture tube base socket trouble. Base socket is one that connects the base card with the picutre tube pins. You can locate it at the base end of the picture tube, soldered on to a printed circuit ...

picture tube base card socket. Base card socket is one which connect the base card to the picture tube. It is diretly soldered to the base card, and can be desoldered it out from the base card and can

tube tv, I guess model 2001, the pictures is stretching outwards and back,in a shaking pattern, a punch in the back will fix it for 20-30m and then it starts again. I am good at soldering, I will like

...picture tube base socket trouble. Both are repairable. Focus pack is integrated with Line Output Transformer [LOT], and picture tube base socket is soldered directly to picture tube base card. You ...

...picture tube base itsef. This board is pluged diretly to the back of the picture tube. Just pull it out straight backward, without making any sideways shake. You may have ot apply some backward ...

...picture tube base. it can be pulled out from it. Be careful not to shake sideways when you pull it out from the picture tube, as it may damage its pins. Normally loose solderigs are very difficult to ...