Question about Brother Office Equipment & Supplies
...the sensor was being detected as a something jamming the machine since it could not be fed through. Looks like it is also important to clean the roller since that was putting more dust on the
...Clean the scanner glass and also the white strip on the transmit door opposite the glass. 5. Do not forget to examine the final roller (paper out roller) This may be damaged or the gear or even the ...
...Clean the roller and the glass with wet towel. Shine a flashlight on the glass to see if there are anymore black marks on it. Use the finger-nail to run across the glass and make sure no debris is on ...
Question about Brother Office Equipment & Supplies
scanner and white roller with alcohol as instructed. . . thinner line, but still a line. There appears to be a groove in the white roller. Does the white roller need to be replaced or do I need to buy
...of that, probably a wet paper towel and plain water will clean the glass. If you sent a staple or paper clip through the document feeder and have scored the roller deal, you're on your own :-) ...
Question about Brother Office Equipment & Supplies
...clean the roller on my Brother Intellfax 4100 fax machine to eliminate the black line that shows on every fax I send out. How do I access the roller? Sorry but I'm not a tech support person. Thanks. ...
...SCANNER BAD. HAPPY FAXING OMNIRESENT I do not what SMPS or CIS scanners mean? I "Brother" 625 fax machine and when I transmit a fax or make a copy, I have black verical line on the left 4" wide. What ...
wipe. My husband said to use nail varnish remover ??!! open up the document feeder and clean the scanner glass. Only use soapy water or alcohol for cleaning Acetone will melt rollers and plastic parts
paper gets jammed in roller The paper doesn't get to the 2nd set of rollers and scrunches up in middle try to clean the rollers with alcoholic liqued
Question about Panasonic Office Equipment & Supplies
...stops because the paper is not moving forward anymore (feeder scanner) You need to clean the rollers inside the feed section, use an alcohol wipe.. or something like methylated spirits and a
26 questions posted
Usually answered in minutes!
237 Questions
232 Questions
180 Questions
101 Questions
105 Questions