...function 7 / monitor key slowly 4 times / press */etc....). However, the fax does not even respond to pressing the function keys. Do you have any other suggestions? Thanks in advance for your help. ...
...a file in memory - stuck blocking the fax receiving. Any ideas how to clear?? Press Function 7 monitor key slowly 4 times * star key 6 scroll down to ALL JOB CLEAR set wait for the machine to ...
Question about Panasonic Office Equipment & Supplies
...function keys. How do you stop it. Thanks Unplug the machine from the rear Hold down the ENERGY SAVER key Plug back in while holding down the above key Scroll down to SHIPMENT SET press SET press 2 ...
Question about Panasonic Office Equipment & Supplies
Function 7 monitor key slowly 4 times * 6 scroll down to SHIPMENT SET set 2 wait for the machine to initialize.... 3 mins. Does this reset the machine to the factor defaults or just clear stuck memory
Question about Panasonic Office Equipment & Supplies
...memory. Message window should say 00%. Try this press Function key press 7 key press monitor key slowly 4 times press * key press 6 key scroll down to ALL JOB CLEAR press SET wait for reboot Good ...
...TO BE ENTERED AT SAME TIME (DIFFERENT NUMBERS) You may have a bad job stuck in memory Do this Function 7 press monitor key slowly 4 times * (star) 6 scroll down to all job clear set wait for a ...
Question about Panasonic Office Equipment & Supplies
...possibilities: Some faxes may be stuck in memory. To clear Press Function 7 monitor key slowly 4 times * 6 scroll down to ALL JOB CLEAR set Other possibilty...mirrors on scanner unit are very
...bad jobs stuck in memory if you are not dead out of toner. To clear the memory press function 7 monitor key slowly 4 times * 6 scroll down to ALL JOB CLEAR set your fax will now reboot after 2
Question about Brother Office Equipment & Supplies
regarding intellifax 2820 able to receive a fax but all functions to send or dial a # are frozen. There is a dial tone. I have tried unplugging unit hoping it would reset. it sounds like you may have ...
function selection. Only the 2,3,6 and * keys are working. Any suggestions please? Regards, Colin Ifield You have a stuck key. Only trial and error will tell you which one. Try pressing them all a few
73 questions posted
Usually answered in minutes!
237 Questions
232 Questions
180 Questions
101 Questions
105 Questions