...stuck" on channel three. I cannot change the channels either by using the tv control buttons or the remote. I can only change the channels by punching in the channels manually. Feed cable signal ...
stuck on channel 3 what should I do Why can you not change the channel? The only way to change channels is either on the TV directly, or from the remote. If neither work then you may need to get a new
...up constantly or down. I would suspect either the channel up or down button on the television stuck. Sometimes you can simply push them to free them up. Sometimes they have to be replaced. Good
...stuck on channel fix Just given a Sony KV-20S40. It is stuck on "channel-fix" and without the manual, I am having trouble turning this off! It is not hooked up to anything but the cable, so I want to ...
...channel 9 remote nor direct input from TV will change it. Is there some sort of reset on the chassis? Try to browse on its menu. Look for channel lock or re-enable it. Other way of parental lock, I ...
Question about Emerson Televison & Video
...channel control. direct tv company says tv has to be on ch. 3 or 4 to work. was working fine till today with the set turned off --unplug it for a few minutes and plug back in which may allow it to ...
...stuck on aux channel cannot program universal remote Check the guide and see if the codes can be set directly to mesh with the TV frequency. Also try to remove plug after switch off for some time -it ...
...CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand. Code SearchIf after trying "Direct ...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! If only scanning in one direction (up or down channels) the button associated with that direction has a tiny switch under it
23 questions posted
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
243 Questions