2013 Harley Davidson Sportster SuperLow "starter relay work" Questions

starter relay. You may also want to check your battery terminals and make sure they are not carbonized. This would happen if the the original reason for replacing the battery was due to loose contacts

starter relay. The starter relay is switched by the start button; on pressing the start button there would be an audible click, that would be the starter relay; the starter relay will only work if the

...starter relay kicking but no movement of the starter motor. As I kept trying I started to hear a vibrating noise, which was coming from the starter relay. I am suspecting the relay now instead of the ...

...starter relay clicks thats all Battery good, starter relay clicks. tried directing power to starter and unit works. Looks like a bad connection between relay and starter button ,try to searching with ...

STARTER RELAY (it clicks...won't start) on a 2004 FXDI SuperGlide. Is this common??? yes. sound like you have a bad battery. try replacing the batter and see what happens. if the starter relay clicks,

...Starter relay, ECU relay are working battery is good. Nothing from the starter it is like it is getting anything. If you have a multimeter check the voltage across the starter when you press the ...

relay are shorted, starter button is working (checked with multi meter) Don't know what else to try?... Please check the continuity from swicth to relay is ok. Make sure that wire not short to ground.

...starter relay, battery, diod, and elec relay...cleaned and tightened all of the electrical connections including the battery ground and cleaned out the starter. The kickstand safety, kill switch, ...

...starter relay under the seat ? And is it a series of clicks or just one.? some reasons for it not working are a faulty clutch switch or the wires to it not connected properly faulty run switch faulty ...

Starter Relay problem I have a 1984 XLS Roadster Iron Head. I rewired the blinkers, tail light etc. before I put everything back where the wires need to be I tested everything to make sure everything ...