Panasonic DP-150A Copier "mylar strip" Questions

mylar strip in the Mp830 to prevent waste ink How do you install a mylar strip in the Canon Mp830 to prevent waste ink from being forced up through the exit rollers? Hi You need to clean the waste ink

...strip or 'mylar' behind it that runs along the length of the printer. This mylar has tiny lines in it (too small for us to see.) The carriage contains a sensor that looks through the mylar (the mylar ...

...mylar strip in the Canon Mp830 to prevent waste ink from being forced up through the exit rollers? The print engine has to be removed and the mylar strip goes on the underside of the printer. To get ...

...mylar strip that tells the carriage where it is in relation to the printer are either dirty or damaged. They are most likely dirty. With the macine powered off and your carriage out of the cleaning ...

WHY DOES A B552 FOLD THE PAPER IN THE ADF? B552 One of your mylars in the df is cuasing the fold...you need to strip it and look for the specific mylar that is causing the fold.

...mylar strip that has dashes on it kind of like a clear barcode. If this strip or the sensor that reads this strip gets dirty then it will lose its place and slam in the machine. If you can reach this ...

How do I reinstall spring and clear plastic strip that fell out? The plastic strip is supposed to be in there unless you had a mylar sheet going thru and it got jamed.

mylar strip in back of cartridge carrier has been removed or has contaminants on it. You should be able to see a clear piece of mylar running behind the carts from end to end. If not there check for a

...mylar strip has become contaminated with ink and/or dust or is loose. The mylar strip runs horizontally along the length of the printer. It threads through a slot in the carriage and is connected by ...

...mylar strip on the ADF and also you need to clean the narrow strip of glass that the scanner uses for ADF scans. The Mylar strip is found by opening the lid, as you do when you put a document on the ...