Toshiba MD13P3 13 in. TV/DVD Combo "remove back cover television" Questions

...back of the tv. There are 9 screws that had to be removed to remove the cover. Once the cover was off it was easy to slide the two dvd's out through the normal slot. THen reveresed all actions and we ...

HOW I UNLOCK PANEL WITH OUT REMOTE CONTROL IN A TV SAMSUNG COMBO VHS the only way to unlock without a remote is to remove the back cover and remove the fuse on the power board, if available

...back off you will have to remove the case enclosing the dvd player as well as all covers.Make sure you label all connectors with mask tape that you remove.Draw a diagram of all the steps you take so ...

...back cover the go straight circuit check soldering loose on the chroma ic and av scart if you find some loose soldering you have to resolder again because it caused by regula heating while its ...

...circuit I use (I removed the cover and traced the DC pins back to the board, but I haven't tested them yet) I am using a standard AC cord plugged into the yellow contacts in the drawing, works

...back cover and noticed a blown fuse, replaced fuse, but when I tried to plug tv into outlet, fuse blew again, repeated this process twice. Each time fuse blew. Any suggestions? Looking for help, ...

...ic. If you are handy with a soldering iron unplug set, remove the back cover, "several screws" and check the underside of the board on the right side, when in dought touch up with soldering

...cover was removed, the DVD player would work fine. But if the clear plastic sensor post on the VCR side is covered, the unit would shut off. I removed the screw holding the sensor post in ...

...remove the back cover & look for an IC that will be attached to a metal plate that acts as a heatsink. Carefully re-solder the pin connections on this IC ensuring you dont leave any of the pins ...

...Remove the back cover to tv, slide the chassis out, remove speaker connector, and other ones to allow the chassis to be out away from cabinet to take the metal cover off surrouding the vcr unit. ...