how to turn input without remote On the TV set, channel buttons. Turn channel down below ch 1. You should see Line 1 Line 2 etc before hitting the highest channel# Yours may say Aux 1 (or Aux 2)
Question about Panasonic Televison & Video
i cannot figure out to switch input to use dvd player i'm not sure how ti switch to the aux input, so i can use my dvd player I had a panasonic combo tv,,do you have the original remote,,,aux was in ...
Setting up TV I can't change from AUX to regular TV There probably is a TV/Video button on the bottom of your TV. Push the button until the screen changes to a regular screen. The TV/Video button is ...
...it asks for it again because we dont have a cable box. We just need to get it to go to input or aux. Also its a good thing to note that we have had the tv unplugged for quite some time. Unplugged ...
...standard . it is likely you have the hdmi cable going to your cable box and the dvd is cabled to aux or tv input . so that would be correct. you can connect the dvd to the cable box aux and then ...
... but I followed the Comcast instructions for their Universal remote and it worked. Turn on TV Press AUX and the SETUP until AUX flashes twice Enter code 991 (AUX flashes twice again) Slowly alternate ...
...to work with the Comcast remote I had to do the following: 1) Do the remote code search in AUX mode (or VCR or DVD mode if your remote has that button instead) using the instructions for ...
...3. Press and release the button for the device you are programming (TV, VCR, DVD, etc.). For AUX, press AUX then the device button you are assigning to AUX. The INDICATOR LIGHT will blink then ...
Question about Televison & Video
...to power on or off. Thanks, Dave You need to program the VCR (which turns the sey on/off) as an aux, then program any Panasonic TV type for TV, and then set the STB button to control STB, TV and ...
Question about Sylvania Televison & Video
Sylvania tv/vcr/dvd keeps going from channel 3 to AUX Ok, so I got this TV used however the first time I used it everything was fine, and then I decided to move it a few feet and now it keeps ...
33 questions posted
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
243 Questions