optoma hd65 doesn't turn on the same problem i have was posted in your site on March16 2010 but couldn't find a solution to it: (as posted in your site) I have exactly the same problem with my Optoma ...
the original bulb blew up after 456 hours. i replaced it. after about 8 hours or so, i tried to start the projector and immediately a "fan locked" warning appeared that was accompanied by a ...
projector will not turn on. The power light is solid Blue and clicks every minute or so like it is trying to start but nothing happens. It has happened to two projectors. I am baffled as to the ...
Question about Optoma Office Equipment & Supplies
...starting up and the bulb will partially light up but never come up to full brightness, then the projector will shut down. This will happen over and over until it just gets to the point it just turns ...
BenQ PE7700 projector starts ok and then fans stoping and red light starts flahing and everythin on screeen disapears manual said taht problem is fans not working i see then fans working when i start ...
Question about ViewSonic Office Equipment & Supplies
Out of the blue my Viewsonic PJD5111 will not start. the temp and lamp lights are red and the ring light is purple. The unit has less than 1500 hrs on it. The unit was working fine on Tuesday night ...
Question about Panasonic Office Equipment & Supplies
I have a problem with our projector. The model is: PT-D3500E and the serial number is: SH5530059. When you switch on the projector the power light goes green after 25 seconds the power light goes ...
Question about NEC Office Equipment & Supplies
NEC VT670 - Lamp won't light. Replaced with new lamp, but gives same error. The manual says to wait a minute and then turn on the power again, but this does not work. I have the same problem. The lamp
Projector won't power up I have an Acer PD120D projector and when you hit the power button on the projector or the remote the power button turns blue like normal and then the lamp light comes on and ...
I have now had my second Infocus LP70+ with the same issue. Unit powers up and the moment Infocus screen appears the unit powers down. Any assistance would be appretiated. Both start with serial ANEN.
23 questions posted
Usually answered in minutes!
94 Questions
59 Questions
55 Questions
35 Questions
28 Questions