Sony Playstation 3 (PS3) Console "tv screen turned blue hear" Questions

...tv on video and the screen remains blue. when I press for it to come on you hear a sound briefly, and briefly scrambling across the screen you see something and the screen turns blue again. What am I ...

...tv screen , i keep getting a not supported mode from my tv. I have tried it on another tv and still the same no output Try holding the power on button down until you hear a series of beeps, each one ...

...TV screen goes blank. Have to turn PS3 off by pressing and holding ON/OFF button for at least 5 seconds or switch on back. Will turn back on (green light) but no screen. CD tray loads/ejects and disc ...

...tv. have tried different hdmi leads. so need help please I have just repaired one that had close to the same prob. The screen would go blue but i could hear it start. I replaced the PS3 power supply ...

...tv is on and on the right input but nothing shows up on the screen. Please help Please try these easy steps to sort your problem out : Step 1. Turn the PS3 off into standby (red light on) Step 2. ...

...press and hold the power button you hear 1 bleep then 2 short bleeps release the power button this should reset the ps3 make sure you've got it connected to the tv screen hope this helps regards ...

tv but it had quit working. SAFE MODE: 1. Place you finger on the on/off sensor leave it their untill you console turns off then take you finger off the sensor. 2. Place your finger back on the on/off

...TV. If it cannot perform the handshake you get the symptoms that you are describing. When the screen is going on and off, unplug the HDMI cable and plug it back in to perform the handshake again. If ...

...TV screen, then most probably the video output is different then the cables you are using (eg: video output HD and you are using AV cables). Are you sure your TV is set correctly? like using HD cable ...

...screen on the ps3 to select anyone of your options. since you are not getting a video display select the display settings and reset yours according to your type tv. if you are using a standard old ...