Sony PlayStation 2 (PS2) Console "buttons dont work controller" Questions

madden 08 when i was playing madden 08 the triangle and x buttons on my controller stopped working. What can I do? IF THOSE TWO BUTTONS DONT WORK ON OTHER GAMES EITHER THAN JUST BUY A NEW CONTROLLER.

...dont work and the controllers dont work and i cant get a picture, i dont know how to fix this problem please help!! You will need to get your PS3 serviced by an authorized engineer. It sounds like a ...

...red light. If that dont work then your controller ports on the system might be dirty and need a light cleaning ....or you dont have a ps2 controller you might have a ps1 controller. Hope this ...

...buttons do not work. it scrolls through the options automatically without stopping and the anolog sticks dont work. How could i fix this. is this problem from the inside of the controller? Yes! your ...

...just by blowing in it and pulling out any fluuf or dirt you see. Do not do this while it is plugged in. Also when you have finished do it up quite tight so the buttons dont stick as much. Thanks ...

...the ps button circle button center of the controller. If that dont work and it isnt charging assume the battery is dead or your usb cable is no good. And you will need to replace which ever is

...buttons dont work when i wanna start the game but they do work when i wanna turn off ps3 how can i fix this problem? ok your going to have to go in the controller to see what the problem is if that ...

...turn on it was working perfectly fine. but now the light does not turn on and the touch sensitive power and eject button dont work does the red power light show? can you turn it on with the ...

...buttons didn't work properly when fighting the baddy in the bell tower, after eventually getting through to the next level through sheer luck and much vino, the up and down control is working in ...

...buttons do not work on both of my PS2 controllers. I have had problems in the past but they have seemed to resolve themselves. This problem wont leave and I have tried blowing dust out of botht port ...