Black & Decker T2350 Toast-It-All Plus 2-Slice Toaster "toaster locking" Questions

the lever to push down the toast will not lock in to start the toastng cycle Inside the toaster (behind the toast, bagel, etc. Buttons) there is a magnet, this needs to be clean for the taster to lock

Toastess -TT 215P 2 slice toaster tab to start toasting will not stay down to initiate toasting process. if you can open it up the thing that holds the tab down could have been used up already. tnx 4 ...

GE toaster model 169100. : the lever to toast won't stay down. I researched removing the base to clean the magnets, but not regular Phillips screws. Suggestions?? I have the same GE toaster and now my

Breville classique toaster Toaster will not toast although it does depress and holds for usual time. Does not heat up burned out element . replace unit. Just fixed my Breville CT20. Cleaned the ...

We have the four slice toaster. The arm on the left will no longer stay down. The side still toasts, but the arm will not lock in the down position. try removing the lower claening plate and remove ...

...locking mechanism" of the lever(s). If after cleaning your toaster out thoroughly, the levers still won't remain depressed, try various outlets throughout your kitchen. Oftentimes, when one ...

...position to cook the toast what can I do? There may be a broken wire inside on that side of the toaster as if all power were out, neither would lock in the down position... Best Regards ...

my toaster does not lock in for toasting my toaster (model no. 44450) does not lock in for toasting. The lever handle keeps coming up. Most small appliance are not worth fixing. If the mechanism that ...

problem with the CUISINART RBT-450BKPC costco toaster the handle doesn't stay down anymore on one side. if i manually push it down the toaster heats up and works fine but it won't lock in position by ...

Sunbeam toaster model 6253 After placing two slices of bread and pushing down the leaver, leaver does not stay locked. What can I do to fix. This is a maechanical fault and all you need to do is look ...