stereo stuck in demo mode stereo is stuck in demo mode.Have reset stereo to factory settings as per operaters manual.Have tried the steps in the operaters amnual to get out of demo mode also. take ...
Once you power the unit on, it shouldn't say overload. If it does, try looking in the manual for a reset button (I assume you have unplugged and plugged in the unit) to reset the amplifier circuitry.
...radio lost the book to the stereo The Audio System does not respond to the remote control. 1. To reset their connection, turn on the remote control and switch the Audio System to Standby mode. 2. ...
I need to reset my stereo. What model Sharp stereo?
Question about Panasonic Audio Players & Recorders
...the left) it trys to find it somewhere in the middle .I think that it is out of sync and needs to reset. I think my problem is I need a digram and set of instructions to do this (if this is the ...
how to reset my sony mhc-gs100??? it keep saying power protect... Your stereo went into protect mode to prevent complete failure of the amplifier inside that radio. Most of the time this happens from ...
Question about Audio Players & Recorders
How do i reset a sony HCD-EC909iP 530w stereo that says "PROTECT" when i plug it in? When the stereo gets plugged in it says "PROTECT" and wont do anything so i cant use it. Look on the back
...in. Result: Same as before. It gets hung up in the cycle and stalls. After a few seconds, the word "rESEt" comes on the LCD screen. The stereo receiver works. The single tape deck has a broken drive ...
...locks up it will not turn on and the clock is frozen at the time of the lockup. The only way i can reset it is to unplug the stereo and plug it in again and reset the clock. I have done this several ...
14 questions posted
Usually answered in minutes!
110 Questions
49 Questions
43 Questions
33 Questions
30 Questions