...belt on my turntable, but don't know how it should go on. Is there a diagram somewhere? 1) Remove the platter - just lift up 2) Underneath the platter, you'll see a small lip section 3) Wrap the belt ...
...belt in jvc turntable HELP...my 20 year old turntable (JVC AL-F350BKX) worked just fine when I put it into storage & now that it's out, the belt has disintegrated & the turntable doesn't spin freely. ...
Question about Electro Brand Audio Players & Recorders
...turntable belt? My turntable either wont move at all, or it starts moving and then slowly stops. What's wrong? Do I need to replace the belt? Belts are like big rubber bands. If they wear out and ...
...belt for the turntable or is there a manuel or schematics to this system? You will need to check your belt for wear. Lift felt on platter and check belt tension. It may need replacing. To replace, ...
...turntable / cd belt drive i have a philco suitcase turntable / cd art. no. 841.242 i need to know how to put the belt back on Place the rubber band around the turntable and put a paper clip, bent up ...
Question about Technics Audio Players & Recorders
...turntable is belt driven you may have a stretched and slipping belt that needs replacement. This seems most likely and is simple to fix. You will have to lift off the turntable to see the mechanism ...
turntable belt wasn't atached and i need th know how to put it back on. Good day. Lift the rubber mat off the platter and notice the two rather large holes in the plater. Put your thumb and forefinger
...turntable to replace the belt? After removing the rubber mat, you should see a clip on the spindle that keeps the turntable on. But you will still not be able to remove the platter until you remove ...
...turntable speed is controlled by a belt, which is virtually a big rubber band. If it spinning too fast , then this means the belt is too tight. The only way this can happen is for the unit to be ...
Question about Memorex Audio Players & Recorders
...turntable is held down by a clip on the spindle. The belt might have to be replaced if it keeps falling off. It will do that if its been used alot. While the turntable is off, if you move the arm you ...
48 questions posted
Usually answered in minutes!
110 Questions
49 Questions
43 Questions
33 Questions
27 Questions