not enough current reaching the amp. Make sure you are using the right size power wire (4awg) and that the power and ground connections are solid. This could also be due to a bad ground to the chassis
...ground cable size that should be used to connect this amplifier. The length of these cables should not exceed 1m to assure safe operation. ? If the length of the power and ground cables exceed 1m, or ...
...ground and keep it short as possible . If power wire is smaller than 8 guage then UPGRADE IT. 75 x 4 would be pulling 60-70 maybe even 80 amps ,add that with any other amps you have to work out total ...
...ground 3 times and still doesnt help plus i have a 6.0 farad hooked up disconnected it to see if that helped but all problems still exist With an amp like that you can not pull enough power from you ...
...ground are good and I'm thinking that it has something to do with not having enough power to run the amp and sub. So i'm really appreciate if any one can help me out or give me some of advice to set ...
28 questions posted
Usually answered in minutes!
114 Questions
80 Questions
69 Questions
73 Questions
63 Questions