Alpine MRV-F540 Car Audio Amplifier "bass amp keeps blowing fuses" Questions

...bass!all i did was disconnect a 1400 watt infinity amp and simply installed this kenwood amp,i checked the ground and it seems fine.can you help me plz? When any amp blows fuses, this indicates that ...

...turn my bass up amp gets hot after about 5 mins and blows the fuses on the inside of the amp got pyle pta 3000 watts dj power amp when turn on my power light indcatior light dont work but it still ...

...Bass Combo keep blowng 2 man fuses When ever I turn on my amp the main fuses keeps blowing. Where can I get a schematic from to troubleshoot it? Or can someone who has had this problem tell me whats ...

...amp everytime i put the bass louder it blows the fuse, im using a 60Amp fuse, In the owners manual says the amp(500.2) takes four 40amp fuses but my amp DON'T have any place for fuses, My main power ...

...amp fuse it plays and once the bass kicks in after about 30 to 40 seconds it cuts off, and stays off for about a minute and then cuts back on and then it will repeat the same thing again. do any of ...

...AMP IN A MONTH Sounds to me like one of your positive cables keeps hitting metal somehow and causeing the fuse to blow. Ive had it happen to me when i had one of those amp splitter boxes that i didnt ...

...bass. I looked around and saw many posts about upping the fuses to 25amps but that just gives me enough time to get to the back to watch them pop. Tore it down and removed the main board. Inspected ...

amp fuse powering a MTX 815-44 sub it is connected to a 1 farad capacitor. My problem is on installation of the capacitor with the 750/1 the fuse keeps on blowing when the volume is above 25 out of 63

...keeps blowing When I turn on my amp, it goes into protect mode, flashes green, then few seconds later, blows my power wire fuse. My power wire is OFC 4 gauge, and my fuse is a 120 amp agu fuse since ...

...bass knob the next day after my amp started with this problem. If I were a guessing man, I'd guess that you had your amp hooked up in a bridged configuration. And also that you connected your two ...