Alpine MRV-F345 Car Audio Amplifier "amp error" Questions

...amp. If the error does not go away when the speaker wires are disconnected, the issue is most likely with the amp itself and will need professional repair. the subs cant handle all the power you got ...

amp has an error of LO and isn't working righ The amp has worked fine for over a year. It just starts a rythmic cycle of bass sounds even when no music is playing. It sounds like background noise, not

...any sound out of it. The amplifier probably has shorted output transistors. If the amp gives the same error message with the speaker wires disconnected from the amp, the amp needs to be

error codes my amp was working everything sounded good then it just quit. the amp has an E-3 code on it what does that mean? One of the parts went bad, and you need to take it into the dealer. The way

error code 02 The amp pops when I turn the car on and then this message flashes. Every now and then it works just fine. How can I fix? According to the manual, error code 02 is displayed when there is

...error is a short between the positive and negative terminals. Check your wiring and measure with with a ohm meter, it should be more that 1, if not 2 ohms. With the wires from the speaker termanils ...

...to this one and it powers on but flashes E-03 ??? its in good condition and doesnt smell fried. my other amp turns on fine but this one just blinks a error code somthing is fried on your ...

...should be able to remove power from the amp, then reconnect power to reset the error. If it doesn't reset, either there is another short in the wiring or the amp has permanent damage and needs

...error code?'' in the blue window E--03 that is laso blinking. the amp is in protect mode because it see's a fault with the internal outputs of the amp. it has to be repaired. could be a simple op amp ...

...at times the rca at the back of the head unit can disconnect. if power light is on then error is either speakers not connected correctly, rca faulty or not connected or speaker output on amp is ...