...battery, ignition, remote, illumination, and speaker (+) and (-) leads. I imagine any slightly newer CDA deck may have a very similar pinout for the main harness. Can anyone email me a resource with ...
...be using the below listed wiring: Yellow - +12V Constant Power (such as the + terminal of your battery) Red - +12V Switched Power (such as the ACC of the IGN switch) Blue - Power Antenna ...
...wire colors are as follows: PIN CLR FUNCTION 1 RED +12 V FROM IGNITION KEY ON/ACC 2 RED +12 V FROM BATTERY (FUSED) 3 WHT LEFT REAR SPEAKER + 4 BLK LEFT FRONT SPEAKER + 5 BLK RIGHT FRONT SPEAKER + 6 ...
...pinout for this cable (it was silkscreened on the pc board at the PC edge mating connector). The signal descriptions are as follows; L. = Signal Left R. = Signal Right S.C. = Signal Common Acc = 12 ...
...Battery wire is NOT yellow and Ground wire is NOT black on the Z828 U4 Nobody is that stupid they couldn't have already figured it out if the colors were that obvious, hence they posted a query on ...
...pinout. http://manual.kenwood.com/files/B64-2950-00_En.pdf Red is accessory power Yellow is to the ...
13 questions posted
Usually answered in minutes!
114 Questions
80 Questions
69 Questions
73 Questions
63 Questions