Alpine CDE-7856 CD Player "hook 3 rca" Questions

...head unit, 2.make sure you have good cables 3.most ken units have 2 sets of RCA hook ups one is for cd/changer the other is a low pass for amp. 4 you have bad RCA channels send to kenwood for ...

...3 the volume in aux than I do in cd or radio mode. from what I've read the rca jacks are there to hook up an aux cd player like the walkman or mp3 player. Is the unit faulty or am I going about this ...

I have a sony cdx-ca720x player and want to hook up a mp-3 player where and what do i need to install you need a RCA to 3.5 Stereo cable and plug it in the rear of the radio. Should be labeled AUX IN!

...3. where & how do I hook up a cable so I can plug in my ipod? 4. I already have a after market multi cd player. Thanks, Eric I believe that you are lucky since the "P" in the model number of the deck ...

...hook up, the speaker wires are white,green,greyand purple, the negatives are the same color with black stripes. The only time you only have only rca is on high end competition stereos,and the only ...

3 pairs of preamp outputs, so you can directly connect a 4-channel amp and a monoblock amp for subwoofers directly to the receiver. If you need additional amps connected, you can use RCA "Y" cables to

...hook into the back of my Pioneer DEH-3700MP Cd player, but i don't know how to make the ipod play through the stereo. When I turn on the radio, you can hear my ipod playing faintly in the background, ...

...hook my ipod to this stereo? the specs say it has ipod connectivity. it could be one of 3 spots on your deck 1 bottom right look for a rca head phone jack 2 top right look for a usb connector 3 back ...

hook your subs up with has to go on the prong 3-in on the top here is a rough diagram: the = signs are power and ground and the prongs are thicker the comma is you remote.. - - - - - - - , - = - - - -

...Hook up amp #2 using a Line converter connected to the output of your stereo which will convert you to RCA the just run a cable to the amp.. 3. If one of the amps has a High Level Input Run a set of ...