Alpine CDA-9851 CD Player "car wont pull" Questions

...wont it turn on? Check the radio fuse and the auto fuse i have the same problem. but if i manually pull it down it works fine.. but as soon as it closes it turns off and don't turn back on till i ...

...car now kenwood KDC-MP238 wont come on. pulled wiring and have power to radio. nothing lights up manually or with remote. what happened??????? Rich There should be a reset button on the unit. That ...

...wont eject my cds so i pulled on the cd with a pair of tweezers while it tried to pull it in and now the cd player don't work. what might be wrong and how can i fix it? remove faceplate and find the ...

...wont turn on Have checked all fuses they are fine. The car is a 94 dodge shadow the radio worked when bought, the previous radio in car worked fine. All colored wires are directly twisted to the ...

wont work with engine on Hi there i put a JVC stereo in my car oh about 4mths ago now and its worked great up untill today when it went off and it wont go on at all with the engine on but WILL work ok

...wont eject - has happened before. Been told I need new car stereo - is this a good option? Would I need to buy new stereo or can CD be removed? yea need a new one to get it out just take it apart and ...

...wont turn on TRY SWAPING THE RED AN YELLOW LEADS AS SOMETIMES (IE VW'S) YOU ARE USING THE CONSTANT MAIN FEED FOR THE MEMORY AND THE SWITCH FEED FOR THE POWER WHICH DEPENDANT ON THE CAR IS NOT ENOUGH ...

...car wont power on everything is hooked up and it will eject the cds but nothing else..what do i do? check the radio fuse on your car most likely its bad. If you pull out the radio the red wire should ...

wont work i have a kenwood-3022 and i plug it in to the car and it turns on then off. then i can unplug it and plug it in annd it wont work at all the only time i can get it to do it is when i pull ...

...wont work till enter 4 digit security code.... ANY suggestions?? You have to go to a Kenwood car audio dealer in your area. They will pull the unit and get the serial # off the deck, call Kenwood and ...