Alpine CDA-9851 CD Player "aux setup" Questions

setup menu and switch aux input to ON but I can't figure out how to get into the setup menu either... If anyone has any info on this it would be greatly appreciated Try this site for free manual http:

...need to set up your system to accept aux. default setting is 'aux off'. refer to system manual to setup system to accept 'aux on' on pages 23 & 24. please read carefully as instructions are

...AUX port when in the initial setup mode. The easiest way I found is to just unplug the unit and start over, it can be found in the initial setup under the function button as AUX1/AUX2 and you need to ...

...Any ideas? you might have to enable the aux imput...my manual for 350s and 300 says its an item in the setup...first clock then beep then aux ,sub,dim,contrast...ect( Hold the select knob in 3

how to turn on aux power press and hold setup button for 3 seconds, then scroll left or right to find AUX, then scroll up or down to turn on or off. Dan,.

...setup menu. Scroll through the menu by pressing the function button (I think). "Aux" should show up and then press up/down or left/right (not sure again). When it says Aux on or yes, turn the unit ...

AUX 2 went missing. how do i get it to come back? hold the SRC button until the stereo turns off. Hold in on the function button (or volume knob) until the setup menu turns on... once it comes up, you

...to play through the radio. Yes, you will need to consult your owners manual (if you don't have one try Kenwoods website). AUX functions are turned ON during initial setup (like when you set the

setup mode presiona el boton the la derecha asta que lleges a aux prende aux i turn off the cd changer aui tienes last instruciones http://www.pioneerelectronics.com/pio/pe/vgn/images/portal/cit_11221

...AUX + SETUP to OFF" as it says you should do to connect an iPod to the Alpine CDE-9872 Receiver? Page 17 of Users Manual. By re-reading the complete User's Manual (which I downloaded for free). The ...