Goodman GMS90703BXA Heater "micro furnace" Questions

Ad

Question about Goodman Heating & Cooling

1 Answer

...micro amps. I put the old (stuck on power blower) board back in and the old Flame sensor and have to cycle the power off and back on to get the furnace to light and stay on. Any suggestions? To recap ...

Ad

Question about Heating & Cooling

1 Answer

furnace was working just fine then nothing. i can get it to come back on but the blower comes on first an only one burner works. tryied to manialy lite it but nothing there is something wrong with the

Ad

Question about Pelonis Heating & Cooling

1 Answer

...it be be more cost efficient to repair (myself) or purchase new heater. Cannot locate fan model # "micro fanmodel UP12D12-TY". I currently have more time than money and 6 months to locate and

Question about Heating & Cooling

1 Answer

...micro second and won't stay on. The switch has been ''touchy'' but it has finally broke. Is there a replacement stat? My furnace and both roof top units work. Try properly re-soldering the switch ...

furnace, fires up, runs until circulating fan runs for approximately 60 seconds, then the flame shuts down. The trouble code is 3-4 indicating a flame proving circuit problem. Three cycles of this and

Question about Goodman Heating & Cooling

1 Answer

...micro allergen. don't want to hurt the blower motor etc thanks. you should be able to. you will not hurt the furnace if you put filter in and watch the operation of heater. If the heater gets to hot ...

...furnace model #PCUHALD12N060C That acts like the flame indicator is faulty. It will ignite and 5-20 seconds later it shuts the gas off. I have replaced the indicator. Any sug? Thomas, the 'flame ...

...furnace has three in shot burners with a HSI located in the right hand side and the flame sensing rod in the left hand side. The only burner that ignites is the side with the HSI while the other two ...

Question about Goodman Heating & Cooling

2 Answers

furnace will continue to operate and the room air blower will turn on in a minute or two. What could go wrong? The unit will not run if there is no signal from the thermostat (bad thermostat or broken

Question about Goodman Heating & Cooling

3 Answers

...micro farad in rating. That rating is printed on the side. If good, the capacitance test should read VERY near that rated number. Within .1 or so. A wider variance from the rating says its bad. If it ...

Not finding what you are looking for?
Goodman GMS90703BXA Heater Logo

1,187 questions posted

Ask a Question

Usually answered in minutes!

Top Goodman Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Are you a Goodman Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...