Goodman GMS90703BXA Heater "ground" Questions

Need to know where the green wire goes? Ground or line side? ground, ground, ground, green is always ground ground

...on my furnace--is this a problem with all these furnaces or did I get a lemon? I would check the grounding from the circuit board to cabinet, the ground coming in to the power of the furnace as ...

...board (ignition controller) is bad2. The gap between the spark ignitor rod and the middle rod (ground) is incorrect. It should be between 1/8" & 3/16"3. There is not a good ground. This

i have a 240 volt electric garage heater manual just has one black wire and one white wire and a ground wire.i hooked the two hot wires from thirty amp breaker to these two lines along with ground and

...that there are 2 green wires that are not connected to anything. They look like they could be ground wires because they have eyelits on them but there is no missing screws or anyplace inside

the furnace burner come on only momentaily and thr board says there is a faulty ground, I have checked all the wiring and found nothing. could you please give me some advice as what could be wrong ...

...board (ignition controller) is bad. (2. The gap between the spark ignitor rod and the middle rod (ground) is incorrect. It should be between 1/8" & 3/16". (3. There is not a good ground. This ...

red light is blinking five times, but i check all wirings they're all good. not reverse and is grounded. lid says 120V & Neutral is Reversed or not Grounded brian [email protected] check all ...

THIS HONEYWELL RPLS730B DOES NOT NEED A GROUND WIRE CONNECTION. BUT WHAT DO I DO WITH THE GROUND WIRE THAT IS NOW NOT USED BUT IS STILL IN THE OUTLET BOX (PLASTIC BOX) first let me ask what are you ...

I purchased a soleus HI15003 elec 240 volt heater and was told to buy 10/3 romex (3 wires plus a ground wire) There is only three terminals on the heater marked L N and then a ground? Should I have ...