...gas valve bad andneeds replacing? if you can use a meter check for 24 volts at the valve when you call for heat. If you have 24 volts and no burners then the valve is bad, if you do not have 24 volts ...
...gas valve, if it is a 750 millivolt system check the 2 wires coming from the pilot burner area for 750 millivolts, if you have a wall mount thermostat, tie the two wires together and see if main ...
Question about Goodman Heating & Cooling
...if 24 volts is being sent from the board to the gas valve, if not the board is nad and will need to be replaced, if there is 24 volts at the gas vlave terminals then the gas valve must be
...to keep the gas valve open. you could substitute a mercury button cell to energize the pilot valve and keep the valve open. give me your email addy and I'll see if I can draw up a diagram for
...gas valve isn't opening to allow combustion of any kind. I've replaced 1 rollout switch, the flame sensor and the control board. What should I do next? Replace the limit control switch and the ...
...sensor , still no flame any sugestions? TEST THE GAS CONTROL VALVE, SHOULD BE TWO SCREWS ON TOP, YOU SHOULD BE GETTING 24 VOLTS AT THE CONTROL VALVE, IF YOU ARE GETTING 24 VOLTS THE GAS VALVE IS
Question about Goodman Heating & Cooling
...Gas valve solenoid have continuity? No continuity replace the valve Getting 24 volts to the gas valve? No voltage from control board check fuse on control board. Replace control board. Any rollout ...
...gas valve, since the air works I am betting you are getting 24 volts to it. So that means you next need to see if the solenoid hat the 24 volts goes to has continuity. If it has no reading you need a ...
...inducer motor start for 30 sec igniter turns on . no gas If the gas valve is getting 24 volts and still not responding then replace it. If it is not getting 24 volts then replace the circuit
...gas valve right after the pilot lights or glow plug whichever. you should hear the gas valve click when pilot is on and have 24volts at the valve at that time. If you do, then the valve is bad.If you ...
1,187 questions posted
Usually answered in minutes!
416 Questions
195 Questions
147 Questions
138 Questions
100 Questions
