Goodman GMS90703BXA Heater "blow" Questions

Ad

1993 Goodman gas furnace keeps blowing fuse when first turned on I connected the thermostat on a short piece of wire to see if a screw in the wall was shorting to cause the fuse to blow immediately ...

Ad

Question about Honeywell Heating & Cooling

2 Answers

...used it in about five years and when I turn it on you can smell the dust. if you have a vac with blow on it , i would blow it out , or use a air line very gently , to blow the dust out . remove

Ad

Question about Goodman Heating & Cooling

1 Answer

burners ignite but then blow backwards w blower burners ignite but then blow backwards out the side once blower kicks on Check your exhaust flue. I think you will find a birds nest or something inside

Question about Vanguard Heating & Cooling

1 Answer

...not touch thermocoupler and ignite the pilot orfice is blocked needs taking out and cleaning or try blowing it with air , or place a tube on and blow down it with the pilot off might blow the dust ...

Question about Goodman Heating & Cooling

1 Answer

fuse blow each time I turn on air check for i have a goodman gms9/gcs9 furnace i have a problem where the fuse blow each time I turn on air check for shorts tranformer wiring between thermistat and ...

Question about Goodman Heating & Cooling

1 Answer

how do I get my heater to blow hot air? Central heater does not blow hot air when I turn on the mercury switch on. Pilot light is on and has never turned off but the heater only blows cold air. The ...

Coleman furnace running, won't shut off, blowing cold only Yesterday, we smelled something electrical burning - but couldn't trace it. The furnace was blowing hot air and it was almost 90 ...

Question about Coleman Heating & Cooling

1 Answer

is blowing cold air This must be electric heat. Gas heat don't blow unless the burners are on first. You must have a broken heating coil. Can you be more specific?If it's blowing cold air then a ...

I have a Martin SCF36M/SCF36MB fireplace with 1 blower that blows toward the inside. Something wrong here? I would love to have a 2 blower setup,FA2 in the manual, but will the same thing happen? if ...

three blinking lights that indicate pressure switch stuck open, when holding in the kill switch and blowing in and out serveral times into the hose from the switch to the motor, blowing in tube r when

Not finding what you are looking for?
Goodman GMS90703BXA Heater Logo

1,187 questions posted

Ask a Question

Usually answered in minutes!

Top Goodman Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Are you a Goodman Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...