...filter is just below the blower. Remove the front furnace doors to get to it. If it is a downflow furnace, remove both furnace doors, and look inside the blower area, they will be sitting above the ...
furnace filters once a month and lately I have noticed that the filters are black in color. It is not just dust as it would be when normally change them, just recently they are sewity. I rub my finger
...filter with out touch the temotast?? Yes you can and if originally installed by code ther should be either a fused disconnect or a breaker mounted on the furnace. The fuse will have a cover and a ...
...black probe touching a ground (body) of the furnace. You should be getting 25.85 volts which means the rollout is good on the top terminal. I would next test the bottom terminal of the rollout by ...
furnace have a circuit board? if so there should be markings on the board where the blower leads are attached. such as cool heat park/or un used motor leads. and to speed up your blower it is going to
Question about Goodman Heating & Cooling
...black rubber hose (vacuum line?) to the housing around the exhaust blower. I took it off, cleaned it, blew into itand sucked on it through the vacuum hose connection (it went from nothing to clearly ...
furnace is a Goodman and is only 3 or 4 years old. change the filters first thing. Make sure it is operating correctly. You can use another thermometer and leave in room and see if it matches the temp
...filter on model# GMP075-3? When looking at the front of the furnace, toward the top, turn the two black tabs so they are vertical, then pull it forward. This will take off the top panel. Now pull the ...
...furnace is starting and stopping thermostat all for heat induce draft fan starts glow coil lights and flame up and the blower kicks in heats the house for 3 minuts blower shuts down flame is stiil ...
96 questions posted
Usually answered in minutes!
1,056 Questions
416 Questions
195 Questions
147 Questions
138 Questions