Goodman GMS81405DNA Open Flame Mid-Size Heater "gas heater orange" Questions

heater lights w/alot of orange glow---- when not lite the pilot light is lower but still has a orange glow at the tip. I know that the pilot should not be as high as it is by past use. Can you help me

...heater seems to work fine but won't light. It doesn't seem to be getting any Gas. I've checked the gas and it is turned on, I leave it running for a few minutes but no gas comes out. One of three ...

gas heater flame be Hello, It should be blue. If it's got orange tips, it's burning dust, If it's got yellow flames or tips, it may need the air shutter adjusted, regulator pressure adjusted, the vent

...your video picture it is. Now, for the problem: First, is there no manufacturer or model number on this furnace? Next, Is the igniter unit functioning? Is the gas coming out under the heater

...orange flams You probably have a plugged orifice. The gas is injected into the burner via a small orifice and, when this plugs, the air / fuel mix is altered, causing the orange flame. Find your ...

...heater? Thank you for your time! check the regulator. a orange-yellow flame means that your not getting enough oxygen to your flame... for every cubic foot of gas you need 24 cubic feet of air to ...

gas heater has blue flame with lots of orange. Is this something to be concerned about? Not to be concerned. It is an indication that the burner is dirty. Try blowing it out with a blow dryer. If that

...gas wall heater in what i think was originally a fireplace. Only half of the heater turns orange when it warms up. The flames along the bottom are all on and blue, it seems the panels in the back ...

heater at times. All new tank, lines installed and tested by gas professional. there may be an adjustment screw for pilot height. you'll have to look at the valve. a pilot should have an inner cone of

...orange tips, but stay lighted just fine. There's an old CharmGlo nearby running off the same gas source and its flame is still deep blue. Suspected a line pressure drop, so I tied in a tank ...